Epson Home Cinema 3200 User Manual

74
Adjusting Projector Features
Follow the instructions in these sections to use your projector's feature adjustments.
Shutting Off the Picture and Sound Temporarily
Adjusting the Color Convergence (Panel Alignment)
Projector Security Features
Saving Settings to Memory and Using Saved Settings
Shutting Off the Picture and Sound Temporarily
You can temporarily turn off the projected picture and sound if you want to redirect your audience's
attention during a presentation. Any sound or video action continues to run, however, so you cannot
resume projection at the point that you stopped it.
Note: If the picture and sound are off for more than 30 minutes, the power automatically turns off. You
can adjust this setting using the projector's menu system.
1. Press the A/V Mute button on the remote control to temporarily stop projection and mute any sound.
Note: To mute only the audio, press the Mute button on the remote control.
2. To turn the picture and sound back on, press the A/V Mute button again.
Parent topic: Adjusting Projector Features
Adjusting the Color Convergence (Panel Alignment)
You can use the Panel Alignment feature to manually adjust the color convergence (the alignment of the
red and blue colors) in the projected image.
Note: You can adjust only the red or blue color convergence. Green is the standard color panel and
cannot be adjusted.

Epson Home Cinema 3200 Specifications

General

Contrast Ratio	40, 000:1
Projection Technology	3LCD
Lens Shift	Vertical: ±60%, Horizontal: ±24%
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Throw Ratio	1.32 - 2.15
Zoom Ratio	1.6x
Color Processing	10-bit
3D	Yes
Warranty	2 years limited warranty
Resolution	1920 x 1080
Lamp Life	5000 hours (Normal)
Connectivity	2x HDMI
HDR Support	Yes
Projection Size	40" - 300"
Noise Level	24 dB (Eco)
Wireless Connectivity	Optional
Supported 3D Formats	Frame Packing, Side by Side, Top and Bottom
Brightness	2900 Lumens (White), 2900 Lumens (Color)