Epson Home Cinema 3200 User Manual

54
Viewing 3D Images
You can view 3D images using your projector. Viewing 3D images requires a 3D-compatible video
device, a compatible HDMI cable, and a pair of Epson RF 3D glasses (not included with your projector).
You can purchase Epson RF 3D glasses from an Epson authorized reseller. To find the nearest reseller,
call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in Canada. Or you can purchase
online at epsonstore.com (U.S. sales) or epsonstore.ca (Canadian sales).
Note: Make sure the 3D Display setting on the Signal menu is set to Auto or 3D.
1. Connect a 3D-compatible video device to the projector using a compatible HDMI cable.
2. Turn on the video device, then turn on the projector.
3. Begin playback from the video device.
Note: Make sure you set the video device to play content in 3D mode.
4. Press the 3D Format button on the remote control to activate 3D mode, if necessary.
5. Slide the power switch on the 3D glasses to the On position.

Epson Home Cinema 3200 Specifications

General

Contrast Ratio	40, 000:1
Projection Technology	3LCD
Lens Shift	Vertical: ±60%, Horizontal: ±24%
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Throw Ratio	1.32 - 2.15
Zoom Ratio	1.6x
Color Processing	10-bit
3D	Yes
Warranty	2 years limited warranty
Resolution	1920 x 1080
Lamp Life	5000 hours (Normal)
Connectivity	2x HDMI
HDR Support	Yes
Projection Size	40" - 300"
Noise Level	24 dB (Eco)
Wireless Connectivity	Optional
Supported 3D Formats	Frame Packing, Side by Side, Top and Bottom
Brightness	2900 Lumens (White), 2900 Lumens (Color)