Epson Home Cinema 3200 User Manual

61
3 V × 60%
4 H × 24%
Note: You cannot move the image to both the horizontal and vertical maximum values.
Parent topic: Using Basic Projector Features
Image Shape
You can project an evenly rectangular image by placing the projector directly in front of the center of the
screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off
to the side, you may need to correct the image shape for the best display quality.
Correcting Image Shape with the Keystone Buttons
Correcting Image Shape with Quick Corner
Parent topic: Using Basic Projector Features
Correcting Image Shape with the Keystone Buttons
You can use the projector's keystone correction buttons to correct the shape of an image that is
unevenly rectangular on the sides.
Note: To provide the best possible image quality, adjust the projector's position to correct the image
shape. If this isn't possible, use the keystone correction buttons on the projector to correct the image
shape.
Note: To use the keystone correction feature, you must first set the lens to the center-top position using
the lens shift dials.
Note: Wait 30 minutes after turning on the projector before setting the focus for maximum accuracy.

Epson Home Cinema 3200 Specifications

General

Contrast Ratio	40, 000:1
Projection Technology	3LCD
Lens Shift	Vertical: ±60%, Horizontal: ±24%
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Throw Ratio	1.32 - 2.15
Zoom Ratio	1.6x
Color Processing	10-bit
3D	Yes
Warranty	2 years limited warranty
Resolution	1920 x 1080
Lamp Life	5000 hours (Normal)
Connectivity	2x HDMI
HDR Support	Yes
Projection Size	40" - 300"
Noise Level	24 dB (Eco)
Wireless Connectivity	Optional
Supported 3D Formats	Frame Packing, Side by Side, Top and Bottom
Brightness	2900 Lumens (White), 2900 Lumens (Color)