C
Fan a stack of paper, then tap it on a flat surface to even the edges.
D
Load the paper with the printable side up, against the right side of the rear paper feed. The printable side is
usually whiter or glossier than the other side.
Note:
Always load paper into the rear paper feed short edge first, even when you are printing landscape-oriented pictures.
E
Slide the edge guide against the left edge of the paper, but not too tightly.
Note:
❏ Leave enough space in front of the product for the paper to be fully ejected.
❏ For plain paper, do not load paper above the c arrow mark inside the edge guide.
For Epson special media, make sure the number of sheets is less than the limit specified for the media.
& “Selecting Paper” on page 13
User’s Guide
Paper Handling
18
To Next Page
Loading...
