EasyManua.ls Logo

Epson L1300 - Horizontal banding

Epson L1300
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Good sample
Good sample
& “Horizontal banding” on page 65
& “Vertical banding or misalignment” on page 66
& “Horizontal banding” on page 65 & “Vertical banding or misalignment” on page 66
& “Incorrect or missing colors” on page 66
& “Blurry or smeared print” on page 67
Horizontal banding
Make sure the printable side (the whiter or glossier side) of the paper is face up in the rear paper feed.
Run the Head Cleaning utility to clear any clogged ink nozzles.
& “Cleaning the Print Head” on page 45
If you have not used the product for a long time, use the Power Ink Flushing utility of the printer driver.
& “Replacing Ink inside the Ink Tubes” on page 48
Try to use genuine Epson ink bottles.
Make sure the paper type selected in printer driver is appropriate for the type of paper loaded in the product.
& “Paper type settings from the printer driver” on page 16
User’s Guide
Troubleshooting for Printing
65

Table of Contents

Other manuals for Epson L1300

Related product manuals