C
Load envelopes short edge first with the flap facing down, against the right side of the rear paper feed. Then
slide the edge guide against the left edge of the envelopes, but not too tightly.
Note:
❏ The thickness of envelopes and their ability to fold vary widely. If the total thickness of the stack of envelopes
exceeds the limit for plain paper, press down on the envelopes to flatten them before loading. If print quality
declines when a stack of envelopes is loaded, load one envelope at a time.
❏ Do not use envelopes that are curled or folded.
❏ Flatten the envelope and the flaps before loading.
❏ Flatten the leading edge of the envelope before loading.
❏ Avoid using envelopes that are too thin, as they may curl during printing.
❏ Align the edges of the envelopes before loading.
User’s Guide
Paper Handling
20
To Next Page
Loading...
