6 Notices
Notices
Computer system requirements
To use the printer and its software, your computer system should meet or exceed the requirements in
these sections:
Your system should include:
■ Microsoft
®
Windows 7, Windows Vista, Windows XP Professional x64 Edition, or Windows
XP
■ USB 1.1 port (minimum) or USB 2.0 port (recommended).
■ A shielded USB “AB” cable up to 6.5 feet (2 meters) long. Using an improperly shielded USB
cable may cause your Epson printer to malfunction.
Visit Epson’s support website at www.latin.epson.com for the latest in compatibility and drivers
for Epson’s L200 printer (website available only in Spanish and Portuguese).
Important safety instructions
Before using your product, read and follow these safety instructions:
General safety
■ Do not block or cover the vents and openings in the printer.
■ Use only the type of power source indicated on the printer’s label.
■ Use only the power cord that comes with the printer. Use of another cord may result in fire or
electric shock.
■ The printer’s power cord is for use with the printer only. Use with other equipment may result
in fire or electric shock.
■ Be sure your AC power cord meets the relevant local safety standard.
■ Avoid using outlets on the same circuit as photocopiers or air control systems that regularly
switch on and off.
■ Avoid electrical outlets controlled by wall switches or automatic timers.
■ Keep the entire computer system away from potential sources of electromagnetic interference,
such as loudspeakers or the base units of cordless telephones.
■ The power-supply cords should be placed to avoid abrasions, cuts, fraying, crimping, and
kinking. Do not place objects on top of the power-supply cords and do not allow the power-
supply cords to be stepped on or run over. Be particularly careful to keep all the power-supply
cords straight at the ends and the points where they enter and leave the transformer.
To Next Page
Loading...
