❏ Product status screen for Web Cong
Launch a web browser from the connected device, and then enter the IP address for Wi-Fi Direct (Simple AP) to
open Web
Cong
. Tap Product Status > Wi -Fi D ire c t and check the Wi-Fi Direct status.
Disconnect unnecessary devices
If four devices have already been connected to the printer, disconnect the unnecessary devices and try to connect
the new device.
Delete the SSID for Wi-Fi Direct on the Wi-Fi screen for the device that you do not need to connect to the printer.
Related Information
& “Printing a Network Status Sheet” on page 29
&
“Web
Cong
” on page 80
Checking the SSID Connected to the Printer
You can check the SSID by printing a network connection report, network status sheet, or on Web Cong.
Related Information
& “Printing a Network Connection Report” on page 23
& “Printing a Network Status Sheet” on page 29
& “Web
Cong
” on page 80
User's Guide
Solving Problems
102
To Next Page
Loading...
