Uneven Colors, Smears, Dots, or Straight Lines Appear in the Copied
Image
❏ Clean the paper path.
❏ Clean the scanner glass.
❏ Do not press too hard on the original or the document cover when you are placing the originals on the scanner
glass.
Related Information
&
“Cleaning the Paper Path for Ink Smears” on page 76
&
“Cleaning the Scanner Glass” on page 76
Moiré (Cross-Hatch) Patterns Appear in the Copied Image
Place the original at a slightly dierent angle.
Banding Appears on the Copied Image
If you press the
y
and the or buttons simultaneously, the printer copies in dra mode and banding
may appear on the printout.
An Image of the Reverse Side of the Original Appears in the Copied
Image
For a thin original, place the original on the scanner glass and then place a piece of black paper over it.
The Printout Problem Could Not be Cleared
If you have tried all of the solutions and have not solved the problem, try uninstalling and then reinstalling the
printer driver.
Related Information
& “Uninstalling Applications” on page 90
& “Installing Applications” on page 92
Other Printing Problems
Printing Is Too Slow
❏ Close any unnecessary applications.
User's Guide
Solving Problems
110
To Next Page
Loading...
