148
Product Light Status
You can often diagnose problems with your product by checking its lights.
Lights
1 WiFi
2
power
3
ink
4
paper
Light status Condition/solution
The power light is on
The product is turned on.
The power light is flashing The product is busy. Wait for the power light to stop flashing before
turning off the product.
The power light is flashing
The light is flashing
The ink pads need to be replaced. You must contact Epson for support.
The power light is on
The ink light is on
Initial ink charging may not be complete. See the Start Here poster for
instructions.
The paper light is flashing
Paper is jammed in the product. Remove the jammed paper, and press
the B&W copy button or the color copy button to clear the error.
To Next Page
Loading...
