Epson L382 SERIES User Manual

1. Place the originals.
By placing multiple originals on the scanner glass, you can scan them all at the same time. Make sure there is a
gap of at least 20 mm between the originals.
2. Start Epson Scan 2.
3. Select Photo Mode from the Mode list.
4. Make the following settings on the Main Settings tab.
❏ Image Type: Select the color for saving the scanned image.
❏ Resolution: Select the resolution.
Note:
e Document Source setting is xed as Scanner Glass, and the Document Type setting is xed as Reective.
(Reective means originals which are not transparent, for example ordinary papers or photos.) You cannot change these
settings.
User's Guide
Scanning
44

Epson L382 SERIES Specifications

General

Scanner Type	Contact image sensor (CIS)
Ink Tank System	Yes
All-in-One Functions	Print, Scan, Copy
Number of paper trays	1
Duplex	Manual
Print Technology	Inkjet
Print Resolution	5760 x 1440 dpi
Connectivity	USB
Paper Capacity	100 sheets
Minimum Ink Droplet Size	3 pl
Category	Home
Paper Formats	A4, A5, A6, B5, Letter, Legal
Maximum Print Speed	33 ppm (black), 15 ppm (color)
Printer Type	Colour
Ink Bottle Capacity (Color)	70 ml (Cyan, Magenta, Yellow)
Monthly Duty Cycle	3, 000 pages per month
Operating Systems	Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10, Mac OS X 10.6.8 or later
Scan Resolution	1200 x 2400 dpi