Epson L4160 User Manual

160
Related references
Where to Get Help
Related tasks
Loading Paper in the Sheet Feeder
Power Cleaning
If you still see white or dark lines or missing nozzles in your printouts, even after cleaning the print head
several times, you can run a Power Cleaning.
If you do not see improvement after running a Power Cleaning, turn off the product and wait at least 12
hours before running another Power Cleaning.
Caution: Running a Power Cleaning consumes a lot of ink, so you should run it only if necessary. Make
sure each ink tank is at least one-third full before running a Power Cleaning, or it may damage the
product.
Caution: Power Cleaning may cause the ink pads to reach their capacity sooner. When an ink pad
reaches the end of its service life, the product stops printing and you must contact Epson for support.
Power Cleaning Using the Product Control Panel
Power Cleaning Using a Computer Utility
Parent topic: Print Head Maintenance
Related tasks
Refilling the Ink Tanks
Power Cleaning Using the Product Control Panel
You can run a Power Cleaning using the control panel on your product.
Note: After a Power Cleaning, you must turn off the product and wait at least 12 hours before running
another Power Cleaning.
1. Turn off the product.
2. Visually check the ink levels and make sure each ink tank is at least one-third full.
Caution: If you run a Power Cleaning when the ink levels are low, you may damage the product.

Epson L4160 Specifications

General

Print Technology	Inkjet
Scanner Type	Flatbed
Scanner Resolution	1200 x 2400 dpi
Print Method	On-demand inkjet (Piezoelectric)
Minimum Ink Droplet Volume	3 pl
Number of Paper Trays	1
Functions	Print, Scan, Copy
Dimensions	375 x 347 x 187 mm
Print Resolution	5760 x 1440 dpi
Print Speed (Black)	33 ppm
Print Speed (Color)	15 ppm
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Paper Handling	100 sheets
Duplex Printing	Yes
Paper Formats	A4, A5, A6, B5, C6, DL
Paper Sizes	A4, A5, A6, B5, Letter, Legal
Ink Tank Capacity	Black: 70 ml, Color: 70 ml (each)