2018/2/26
Revision: 1 Page: 65
5.1.33 Set Print method ID ESC (m n
ESC (m nL nH n Ver 1.00
[Name] Set Print method ID [Setting]
[Format] 1BH, 28H, 6DH, nL, nH, n
[Range of Definition] nL=01H,nH=00H
10H, 20H, 21H, 22H, 23H, 24H, 40H, 41H, 42H, 50H, 51H, 52H, 53H, 54H, 55H, 57H, B1H,
B2H, B3H
[Function] 1) The print mode is selected according to the values of n.
2) If n have a value other than those above, this command is ignored.
3) This command is only effective in graphics mode.
4) The value of setting refers to CHAPTER3.
[Initial State] -
[Related Commands]
[Setting] Commands whose settings are affected by this command.
None
[Setting] Commands that change the effects of this command.
The ESC @ command selects black.
[Operation] Commands whose functionality is affected by this command.
None
[Operation] Commands that change the effects of this command.
The ESC (G command puts the printer in graphics mode.
To Next Page
Loading...
