Epson L7180 - 7.12 Media error information

2018/2/26
Revision: 1 Page: 93
7.12 Media error information
Structure
Item Byte(Hex) Value(Hex)
Header 1 3Bh
Parameter counter 1 01
Parameter 1 Media error information
The parameter < Media error information > is one byte Binary code that indicates the information about media error
information.
This parameter is added only when error code ER = 55H.
Parameter value Type Comment
00h - 0Fh Reserved ---
10h Improper insert face at
Hagaki
This error occurs that ZIP code frame is not found
in printing side when a user wants to print in
address side.
11h Improper insert face at
Hagaki
This error occurs when ZIP code frame is found
in printing side when a user wants to print in
communication side.
12h Improper insert face at
Hagaki
This error occurs when some printings are found
in printing side when a user wants to print in
communication side.
13h Improper insert face at
Hagaki
This error occurs when printing side is different
from previous printed media.
14h - FFh Reserved ---