Caution: Do not turn the product off or on with the CD/DVD tray inserted. Do not insert the CD/DVD tray
while the product is printing or performing other operations. Otherwise, your product may be damaged or
the surface of the CD/DVD may become dirty or scratched.
Note: If you are using discs where the printable area extends to within 0.16 inch (4 mm) of the center
hole, you may need to adjust the inner diameter setting using the control panel or Epson Print CD
software.
1. Burn your files, music, or video onto your disc before printing on it.
2. Make sure the product is turned on.
3. Open the front cover.
4. Remove any paper from the output tray and make sure the output tray is closed.
5. Lower the tray lever.
Caution: Do not move the tray lever while the product is printing.
149
To Next Page
Loading...
