6. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle
Check Pattern and click Print.
7. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
• If there are no gaps, click Finish.
• If there are gaps or the pattern is faint, click Clean to clean the print head again.
If you don’t see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then check the print head nozzles and try cleaning the print head again, if necessary.
If quality still does not improve, contact Epson.
Parent topic: Print Head Cleaning
Related tasks
Checking the Nozzles Using a Computer Utility
Loading Paper in the Printer
Related topics
Refilling Ink
Ink Tube Flushing
If you have not used the product for a long time and see white or dark lines or missing colors in your
printouts, even after cleaning the print head several times, you can flush the ink tubes.
184
To Next Page
Loading...
