Epson L850 - Removing a Printed CD;DVD

Parent topic: Printing on CDs/DVDs
Removing a Printed CD/DVD
After your CD or DVD is printed, the tray ejects partially from the product.
1. Pull the CD/DVD tray out of the product and remove your CD or DVD from the tray.
Note: Store the CD/DVD tray on a flat surface to prevent it from warping.
2. Raise the tray lever.
Caution: Do not move the tray lever while the product is printing.
After printing, handle the CD or DVD carefully. You may need to wait up to 24 hours for the ink to dry fully
before inserting it in a drive, depending on the type of disc you used. Keep printed discs away from
moisture and direct sunlight.
151