6. Select Head Cleaning and press the OK button.
7. Press the start button to clean the print head. You see a message on the LCD screen during the
cleaning cycle.
Caution: Never turn off the product or open the scanner unit during a cleaning cycle or you may not
be able to print.
When the cleaning cycle is finished, you see a message on the display screen.
8. Select Nozzle Check and press the OK button. Press start to run a nozzle check and confirm that
the print head is clean.
If you don’t see any improvement after cleaning the print head up to 3 times, turn the product off and wait
at least 12 hours. Then check the print head nozzles and try cleaning the print head again, if necessary.
If quality still does not improve, contact Epson.
Parent topic: Print Head Cleaning
Related tasks
Checking the Nozzles Using the Product Control Panel
Loading Paper in the Printer
Related topics
Refilling Ink
Cleaning the Print Head Using a Computer Utility
You can clean the print head using a utility on your Windows or Mac computer.
182
To Next Page
Loading...
