is tightened securely. Be sure to keep the ink bottle upright when tightening the cap, and take
measures to prevent ink from leaking when transporting the ink bottles.
• Do not put opened ink bottles in the box with the printer.
• Do not carry the product by its control panel; this may damage the product.
1. Turn off the product.
2. Lift up the scanner unit and check to see if the print head is in the far right position (the home
position). If not, turn on the product, wait for the print head to move, then turn the product off again.
3. Secure the print head to the case with tape.
Caution: Do not place tape on the white flat cable inside the product; otherwise, you may damage
your product.
4. Lower the scanner unit.
5. Remove all the paper from the product.
6. Remove any memory cards inserted in the product.
7. Unplug the power cable.
8. Disconnect any connected cables.
195
To Next Page
Loading...
