Epson LQ-1070 - Lease)

REV.-B
9. While holding down the three LEVER ASSY., PF, pull out and remove the SHAFT, RELEASE Remove
the LEVER
ASSY., PF and the COMPRESSION SPRING, 1300 from the PAPER GUIDE.
10. While holding open the clips that secure the DETECTOR
ASSY., RELEASE to the PAPER GUIDE,
remove the DETECTOR ASSY., RELEASE.
LEVER ASSY., PF
(* This picture is 80-column. 136-column
printer has four Paper advance Rollers and
four
sDrinas.
,-
‘~ ~—~ COMPRESSION SPRING, 1300
{
%
‘ /
5Ab (il.
A
‘“./
SHAFT, RELEASE
I
Figure 3-21. Removing the LEVER ASSY., PF
Point to Note for Assembly
I
Insert the SHAFT, RELEASE in the PAPER GUIDE in the way shown in the diagram below.
I
I
Figure 3-22. How to Insert the SHAFT, RELEASE
3-16