Epson LQ-1070 - Removing the DETECTOR ASSY., PE, FRONT; Removing the DETECTOR ASSY., PLATEN

I
I
I
REV.-B
3.2.5.10 Removing the DETECTOR ASSY., PE, FRONT
1. Remove the PRINTER MECHANISM from the HOUSING
ASSY., LOWER (see Section 3.2.4).
2. Open the clips that hold the DETECTOR
ASSY., PE, FRONT to the FRAME, MAIN, BASE. Remove the
DETECTOR
ASSY., PE, FRONT.
DETECTOR ASSY ,
Figure 3-25. Removing the DETECTOR ASSY., PE, FRONT
3.2.5.11 Removing the DETECTOR
ASSY., PLATEN
1,
2.
Remove the PRINTER MECHANISM from the HOUSING ASSY., LOWER (see Section 3.2.4).
Remove the clips that hold DETECTOR
ASSY., PLATEN to the FRAME, MAIN, LEFT. Remove the
DETECTOR ASSY., PLATEN.
n
7 ~~= DETECTORASSY
/Left
~rame
PLATEN
1’
II
Itll II
)UU~J
Figure 3-26. Removing the DETECTOR ASSY., PLATEN
3-18