139
Printer Specifications
Mechanical
Printing method: 24-pin impact dot matrix
Printing speed: High speed draft 300 cps at 10 cpi
Draft 225 cps at 10 cpi
270 cps at 12 cpi
337 cps at 15 cpi
Draft condensed 192 cps at 17 cpi
225 cps at 20 cpi
LQ 75 cps at 10 cpi
90cps at 12 cpi
112 cps at 15 cpi
LQ condensed 128 cps at 17 cpi
150 cps at 20 cpi
Printing direction: Bidirectional logic seeking for text and
graphics printing. Unidirectional text or
graphics printing can be selected using
software commands.
Line spacing: 1/6-inch or programmable in 1/360-inch
increments
Printable columns: 80 columns (at 10 cpi)
Resolution: 360 × 360 dpi maximum
Feeding method: Friction feed (rear paper entry)
Push tractor feed (rear paper entry)
Push and Pull tractor feed (rear paper
entry)
Pull tractor feed (rear or bottom paper
entry)
To Next Page
Loading...
