150
Paper alignment
Printing starts at “0” on the scale. The unprintable area is to the
left of the “0.”
Command Lists
Your printer supports the EPSON ESC/P 2 control codes and IBM
2390 Plus emulation control codes listed below.
EPSON ESC/P 2 control codes
Selecting an EPSON ESC/P 2 printer in your software allows you
to use advanced fonts and graphics.
General operation:
ESC @, ESC U, ESC EM
Paper feeding:
FF, LF, ESC 0, ESC 2, ESC 3, ESC +, CR
To Next Page
Loading...
