A
Feeder guard Prevents foreign substances from entering the printer. This cover should
usually be closed.
B
Rear Paper Feed Slot Loads paper.
C
Edge guide Feeds the paper straight into the printer. Slide to the edges of the paper.
D
Output tray Holds the ejected paper.
E
Output switch lever Raise to output paper to the output tray. Lower to output paper facing up to
the front of the printer.
F
Edge guide Feeds the paper straight into the printer. Slide to the edges of the paper.
G
Paper cassette Loads paper.
A
Rear cover Remove when removing jammed paper.
B
LAN port Connects a LAN cable.
C
USB port Connects a USB cable to connect with a computer.
D
AC inlet Connects the power cord.
E
Maintenance box cover Open when replacing the maintenance box.The maintenance box is a
container that collects a very small amount of surplus ink during cleaning or
printing.
Related Information
& “Control Panel” on page 13
User's Guide
Printer Basics
12