4. Align the tip of the bottle with the lling port, and then stand the bottle slowly to insert it into the lling port.
c
Important:
Do not allow the top of the ink bottle to hit against any objects
aer
removing its cap; otherwise ink may spill.
Note:
If the ink does not start owing into the tank, remove the ink bottle and try reinserting it.
5. When the ink reaches the upper line, pull out the bottle.
Ink pours into the tank just by holding the bottle normally without squeezing. e ink ow stops
automatically when the ink is
lled
to the upper line.
User's Guide
Relling Ink and Replacing Maintenance Boxes
74