EasyManua.ls Logo

Epson Moverio Pro BT-2000 - Specifications

Epson Moverio Pro BT-2000
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
Specications
Model Number BT-2000(H725A)/BT-2200(H853A)
Material Polysilicon TFT active matrix
LCD panel size 0.42" wide panel (16:9)
LCD panel pixel count Horizontal 960 x Vertical 540 dots
Angle of view Approximately 23 degrees (diagonally)
Virtual screen size 64" support (virtual viewing distance 4 m)
Color reproduction 24 bit color (approximately 16,770,000 colors)
Supported movie formats MP4 (MPEG4+AAC), MPEG2 (H.264+AAC)
Supported still image formats JPEG, PNG, BMP, GIF
Supported audio formats WAV, MP3, AAC
Supported 3D Side-by-side format
Internal memory Main memory 1 GB
User memory 8 GB
External memory microSD (2 GB maximum), microSDHC (32 GB maximum)
Connector ports microUSB, 4 pin mini jack (earphones with microphone complying with the CTIA standard)*1, microSD card slot
Operating temperature 0 to 40°C, humidity 20 to 80% (no condensation)
Charging temperature 5 to 35°C, humidity 20 to 80% (no condensation)
Storage temperature -10 to 60°C, humidity 10 to 90% (no condensation)
Power voltage Controller 11 VDC 1.64 A (when AC adapter connected)
AC adapter Model Number AST1116Z2-1
Manufacturer PHIHONG TECHNOLOGY CO., LTD.
Rated output voltage/
Current
1.64A/11V
Power consumption When operating at full capacity 4000 mW, when in sleep mode 80 mW, when off 5 mW
Battery Type Lithium-ion batteries 1240 mAh (x2)
Lithium content Less than 1.5 g
Amount of watt hour
rating
Less than 20 Wh
Frequency band IEEE 802.11 b/g/n/a
Frequency range 2.4 GHz band 1 to 13 ch, 5 GHz band 36 to 140 ch
Modulation OFDM, DS-SS
Potential interference range 10 m
Battery life Approx. 4 hours (When operating at high-capacity)
Reliability Life span 10,000 h (When brightness is set to the default, and used continuously in an environment of 25°C. Screen lumi-
nance declines by 50% from the initial stages, and points begin to appear in the wear out failure period.)
MTBF 180,000 hours (Failure means a random failure during the random failure period.)
Exterior dimen-
sions
(W x D x H)
Headset BT-2000: 205 x 136 x 100 mm (without the head band)
BT-2200: 206 x 96 x 109 mm (without the rubber band)
Controller 70 x 157 x 35.3 mm (without protruding section)
Mass Headset BT-2000: 290 g (without cables)
BT-2200: 270 g (without cables)
Controller 265 g (without batteries, 1 battery is approx. 50 g)
Camera Pixel count 5 million pixels
Image resolu-
tions
Still im-
ages
2596 x 1948 dots
Movies 1920 x 1080 dots
Depth
sensing
640 x 480 dots (depth sensing distance 30 to 100 cm)
Earphones with
mic
Earphone impedance 16Ω ±15%
Earphone output Max. voltage 150 mV or less
Voltage with broadband characteristics 75 mV or more
Mic Capacitor microphone
Sensors GPS/geomagnetic sensor/IMU (accelerometer/gyroscopic sensor)/illumination sensor
Bluetooth 3.0 HSP/A2DP/HID/OPP/SPP/AVRCP
Bluetooth 4.0 LE *2 PXP/FMP
*1 Restrictions in operation may occur when using an adapter plug.
*2 You can only connect to a beacon with devices specified by Epson.

Other manuals for Epson Moverio Pro BT-2000

Related product manuals