9
Wearing the Controller
Wearing the Controller on Your Waist
Attach the controller holder to the belt around your waist.
Caution
If you are not wearing a belt, you cannot wear the controller on your
waist.
A
Placing the controller in the controller holder.
Place it in the holder so that the control panel of the controller
is visible.
B
Thread the band at the back of the controller holder
between your belt and trousers.
C
Attach the band to the bottom of the controller
holder.
D
Wind up the extra cable, and secure it in place with
the strap.
Make sure the cable does not catch on anything in the sur-
rounding area.
E
Secure the cable with the reel clip.
Secure the reel clip to your collar so that the cable runs down
close to your abdomen.
Warning Product usage precautions
• Make sure you check that the following parts are not damaged each time you use this product.
• Controller holder
• Armband
• Shoulder holder (optional)
• Reel clip
If you notice any problems with any of these items, do not use the product as when it cannot be secured safely, it could cause an accident or injury.
• If the cables come loose when you are wearing the controller, they could get caught or entangled in something and cause an accident or injury.
Make sure all cables are connected securely.
You can wear the controller on your waist or arm.
When using the optional shoulder holder, you can also wear this product on your chest.
When working, make sure you wear the product in a position that does not interfere with your movements.
Note
Before wearing the controller and headset, put on the supplied mono earphones
with mic. Connect it to the earphone socket on the controller, and wear them as
shown in the illustration on the right.
Caution
When removing the controller from the controller holder, push the controller out of the hole on the bottom of the controller holder. Do not pull it out
by the cables.
BT-2200 BT-2000
For Both Headsets
For Both Headsets
To Next Page
Loading...