Epson P07303 - Reset EEPROM; Save Data for Demo Display; Run Demo Message

11
1
5.7.4 Reset EEPROM
STX 05 07 n ETX /Reset EEPROM/
ASCII Format STX 05 07 n ETX
Dec. Format [02][05][07][n][03]
Hex. Format [02h][05h][07h][n][03h]
Description This command will reset the content of EEPROM (e.g. Demo scroll data,
user-define
character)
N
D
escription
31h
C
lear all EEPROM contents
32h
C
lear upper line data message
33h
C
lear lower line data message
5.7.5 Save data for demo display
STX 05 L n m ETX /Save demo message to EEPROM/
ASCII Format STX 05 L n m ETX
Dec. Format [02][05][76] n m [03]
Hex. Format [02h][05h][4Ch] n m [03h]
Description Save demo message for upper line and bottom line
n = 31h save data message for upper line
n = 32h save data message for lower line
m = data message ; the maximum data character is under 200
5.7.6 Run Demo message
STX 05 L n m ETX /Run demo message/
ASCII Format STX 05 D 08 ETX
Dec. Format [02][05][68][08][03]
Hex. Format [02h][05h][44h][08][03h]
Description Run demo message for the display