1
1. Features
(1) Data can be display on 20 columns x 2 lines.
(2) Blue–green color and large character are easy to see
(3)The DIP switches setting emulate commands mode, baud rate and international character.
(4) Command emulation modes include POS7300/ CD5220 II/ ADM787/ UTC / AEDEX/ Epson/ DSP800.
(5) User’s-defined character and message can be downloaded.
(6) Display area can be controlled by window function.
(7) Provides an interface based in RS-232C, and RS232C baud rate from 4800 to 38400 bps.
(8) Reverse characters can be specified using the Epson command set.
(9) Support software has facility for designing user-defined characters and downloading setup
parameters to the display.
10.) The other option interface RS485 can link max. 256 display by one port.
11.) Provides pass through function, so both printer and display can be connected to the same port.
To Next Page
Loading...
