Epson P07303 - Dip Switch Settings; Command Type Selection; Baud Rate Selection; Parity Check Selection

7
5. Dip Switch and Software Setting
5.1 Command type selection
SW1 SW2 SW3 Command type Default
ON ON ON POS7300 
OFF ON ON ESC/POS
ON OFF ON ADM 787
OFF OFF ON DSP800
ON ON OFF AEDEX
OFF ON OFF UTC/P
ON OFF OFF UTC/S
OFF OFF OFF CD5220
5.2 Baud rate selection
SW8 SW9 Baud rate (bps) Default
ON ON 4800
OFF ON 9600 
ON OFF 19200
OFF OFF 38400
5.3 Parity check selection
SW10 Parity check Default
ON None-parity 
OFF Even-parity
5.4 Demo Mode selection
SW11 Show demo string Default
ON Enable 
OFF Disable