Home > Maintenance
Cleaning the Scanner
To keep your scanner operating at its best, clean it periodically using the following procedure.
Turn off the scanner using its power switch.
Unplug the AC adapter cord from the scanner.
Clean the outer case with a cloth dampened with mild detergent and water.
If the glass surface of the document table gets dirty, clean it with a soft, dry microfiber
cloth. If the glass surface is stained with grease or some other hard-to-remove material,
use a small amount of glass cleaner and a soft cloth to remove it. Spray the cleaner
onto the soft cloth; never spray cleaner directly onto the glass. Wipe off all remaining
liquid.
Remove the document mat and clean the transparency unit window as described in step
4.
To Next Page
Loading...
