Paper/Media
Available Paper
Note:
❏ Use passbooks, plain paper, recycled paper, and multipart forms under the temperature and
humidity conditions described below:
Temperature: 5 to 38 ˚C (41 to 100.4 ˚F)
Humidity: 10 to 85 % RH
❏ Use passbooks and paper that have more than 60% reflectance.
❏ Do not load passbooks that are creased or have ripped seams.
❏ Do not use a passbook that has metallic parts such as staplers or metal clips.
❏ Do not use a passbook with sticky parts such as stamps or seals.
❏ Do not use a passbook that has any pages smaller than the cover page.
❏ Do not print on the front or back cover of a passbook. Printing can be done only when the passbook is
opened.
❏ When you use paper that is shorter than 110.0 mm, set the paper eject direction to front. The factory
set default is front. Please access http://www.epson.com for information.
❏ Do not load paper that is curled, folded, or crumpled.
❏ Do not punch holes in the area from 25.0 to 40.0 mm from the left edge of paper. See the illustration
below.
PLQ-35 User’s Guide
Product Information 68
To Next Page
Loading...
