Single sheets (including multipart forms)
A The minimum top margin is 1.0 mm (0.04 inch).
B The minimum bottom margin is 3.1 mm (0.12 inch).
C The minimum left and right margins are 3 mm (0.12 inch).
*Minimum of 2.54 mm (0.1 inch) for WNI4915 emulation.
Standards and Approvals
!
Warning:
❏ This is a Class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
❏ The connection of a non-shielded printer interface cable to this printer will invalidate the EMC
standards of this device.
❏ You are cautioned that changes or modifications not expressly approved by Seiko Epson
Corporation could void your authority to operate the equipment.
PLQ-35 User’s Guide
Product Information 74
To Next Page
Loading...
