Presenting with the Remote Control 31
Controlling the Volume
To change the volume, press the or button on the remote
control.
You can also adjust the volume using the projector’s menu system. See
page 54.
Highlighting Your Presentation
You can display a pointer to call out important information on the
screen. If you want to customize the pointer tool, you can choose from
three alternative shapes.
Using the Pointer Tool
1. To activate the pointer tool, press the Pointer button on the
remote control. A pointer appears on the screen.
If you prefer to use a different style of pointer, see the instructions
in the next section.
2. Use the pointer button on the remote control to position the
pointer on the screen.
note
To temporarily shut off the
sound and picture, press the
A/V Mute button or close
the A/V mute slide.
Pointer
To Next Page
Loading...
