Epson PowerLite 4300 User Manual

Installing EasyMP Monitor
7
Installing EasyMP Monitor
Operating environment
This software is compatible with computers that comply with the
following requirements.
* Supports only 32 bit version of OS.
• Macintosh computers cannot be used.
• Operations carried out at the computer may become slow depending
on the number of projectors being managed. If this happens, use a
computer with higher specifications.
• EasyMP Monitor cannot be used in environments which do not allow
pings to be transmitted.
Transferring the settings
If you are already using EasyMP or EMP Monitor, you can transfer the
projector settings to this version. The settings are stored as a data file
(EMP Monitor.dat). Make a copy of the EMP Monitor.dat before you
install this software. EMP Monitor.dat can be found at the following
location if the default settings were used to install the software:
• If your operating system is Windows 2000 or Windows XP
"C:\Program Files\EPSON Projector\EasyMP (or EMP) Monitor Ver.
x.xx (Ver. x.xx represents the software version)"
• If your operating system is Windows Vista or Windows 7
"C:\Users\(User Name)\AppData\Local\VirtualStore\Program
Files\EPSON Projector\EasyMP (or EMP) Monitor Ver. x.xx (Ver. x.xx
represents the software version)"
If you cannot find the "AppData" folder, click "Start" - "Control Panel"
- "Appearance and Personalization" - "Folder Options". Select "View"
tab, and then configure the "Show hidden files, folders, and drives"
setting in "Advanced settings".
After installing this software, follow the instructions below before
starting EasyMP Monitor to transfer the settings.
• If your operating system is Windows 2000 or Windows XP
Overwrite the existing EMP Monitor.dat file with the copy you made.
The existing EMP Monitor.dat file is in "C:\Program Files\EPSON
Projector\EasyMP Monitor Ver.x.xx".
OS Windows 2000 Professional SP4
Windows XP Home Edition SP2/SP3
*
Windows XP Professional SP2/SP3
*
Windows Vista
*
(All editions except Starter Edition)
Windows Vista SP1/SP2
*
(All editions except Starter Edition)
Windows 7 32 bit version
(All editions except Starter Edition)
Windows 7 64 bit version
• Internet Explorer Ver. 5.0 or later must be installed.
CPU Pentium MMX 166 MHz or higher (Pentium II 233 MHz
or higher recommended)
Memory
capacity
64 MB or more (128 MB or more recommended)
Free hard disk
space
50 MB or more
Display SVGA (800 x 600) or higher resolution, 32 bit or higher
display color

Epson PowerLite 4300 Specifications

Display

native resolution	1024 x 768
aspect ratio	Supports 4:3, 16:9, 16:10
color light output	5200 lumens

Power

power supply voltage	100 – 240 V ±10%, 50/60 Hz AC
power consumption normal mode	464 W
power consumption ECO mode	383 W

Operating Environment

operating temperature	32 ˚ to 104 ˚F (0 ˚ to 40 ˚C)
fan noise normal mode	38 dB
fan noise ECO mode	32 dB

Weight and Dimensions

dimensions including feet	18.50" x 12.26" x 5.96"
dimensions excluding feet	18.5" x 12.26" x 5.31"
weight	15 lb