Why can't I monitor my Epson Software projector in standby mode?
To monitor and control the Epson projector using EasyMP Monitor when it's in standby mode, ensure the projector's Standby Mode is set to Communication On (or Network On), or that Network Monitoring is set to On within the configuration menu.
What to do if an e-mail message is not sent when a problem occurs with an Epson Software projector?
If you are not receiving email notifications when there's an issue with your Epson projector, verify that the SMTP server IP address, Port Number, and Recipient mail address have all been entered correctly in the settings.
How to fix Epson Software projectors that cannot be monitored or controlled?
If the Epson projector cannot be monitored or controlled, check the following: 1. Ensure the network cable is correctly connected; reconnect if necessary. 2. Verify the Network configuration settings. 3. Reinstall EasyMP Monitor. 4. Register the projectors you intend to monitor or control.
Why is my Epson Software projector not sending e-mail alerts after a critical error?
If your Epson projector has momentarily stopped working due to a critical problem, it won't be able to send email messages. If the projector cannot be reset after checking, contact Epson.
Highlights key features like bright projection, resolution, and connectivity.
Instructions for connecting various audio and video sources.
Detailed instructions for connecting various computer video and audio sources.
Guides for connecting different types of video devices to the projector.
Steps for connecting a video source via HDMI for optimal image quality.
Instructions for connecting and setting up the projector for wired network use.
Steps for setting up the projector for wireless network connectivity.
Step-by-step instructions for powering on the projector.
Step-by-step instructions for powering off the projector.
Correcting image distortion for a rectangular projection.
Options for securing the projector against theft or unauthorized use.
Explains different types of password protection for the projector.
General guidelines for maintaining the projector's performance and longevity.
Importance and procedures for maintaining the air filter and vents.
Detailed steps for safely replacing the projector's lamp.
General troubleshooting advice for projector issues.
Solutions for common issues related to projected images or audio.
Troubleshooting projector and remote control operational issues.
Troubleshooting steps for when no image is projected.
Steps to resolve issues when a "No Signal" message is displayed.
Troubleshooting steps for "Not Supported" message issues.
Steps to fix problems where only part of an image is displayed.
How to correct projected images that are not perfectly rectangular.
Troubleshooting steps for projected images with noise or static.
Steps to fix projected images that appear fuzzy or blurry.
Troubleshooting steps for incorrect image brightness or color display.
Steps to resolve issues related to audio output from the projector.
Troubleshooting steps for projector power and unexpected shut-off issues.
Steps to resolve issues related to the projector's remote control.
Troubleshooting steps for projector password-related issues.
To Next Page
General