INSTALLATION
HANDBOOK
Lamp and Status Information
Epson PowerLite 450W / 460
3
5. Grasp the lamp handle as shown and pull it straight out.
6. Gently insert the new lamp along the guide rail, then push it in
place.
note
The lamp(s) in this
product contain mercury.
Please consult your state and
local regulations regarding
disposal or recycling. Do not
put in the trash.
7. Tighten its screws, then press it in by the handle until it clicks
into place.
note
Tighten the lamp cover
securely so you do not receive
a lamp cover error when you
turn the projector back on.
To Next Page
Loading...
Need help?
General