Wall-mounted
Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an
angle.
If you project from the ceiling or wall, or from the rear, be sure to select the correct Projection option in
the projector's menu system.
Parent topic: Projector Placement
Related references
Projector Setup Settings - Extended Menu
Projection Distance
The distance at which you place the projector from the screen determines the approximate size of the
image. The image size increases the farther the projector is from the screen, but can vary depending on
the zoom factor, aspect ratio, and other settings.
Use the tables here to determine approximately how far to place the projector from the screen based on
the size of the projected image. (Conversion figures may have been rounded up or down.) You can also
use the projector Throw Distance Calculator at epson.com/support (U.S.) or epson.ca/support (Canada).
26
To Next Page
Loading...
Need help?
General