Setting Options Description
Power Consumption Normal Selects the brightness mode of
the projector lamp
ECO
Normal: sets maximum lamp
brightness
ECO: reduces lamp brightness
and fan noise, and saves power
and lamp life
Light Optimizer On When Power Consumption is
set to Normal, the lamp
Off
brightness is adjusted based on
the projected image; you can set
this option for each color mode
Sleep Mode On Automatically places the
projector in standby mode after
Off
an interval of inactivity
Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode
A/V Mute Timer On Automatically turns off the
projector after 30 minutes if A/V
Off
Mute is enabled
Standby Mode Communication On Enable this setting to allow the
following operations to occur
Communication Off
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to Always On)
• Output audio from a
microphone (A/V Output must
be set to Always On)
123
To Next Page
Loading...
Need help?
General