Epson PowerLite 92 - Selecting Wired Network Settings

1. Connect one end of the network cable to your network router.
2. Connect the other end of the cable to the projector's LAN port.
1 LAN port
Parent topic: Wired Network Projection
Selecting Wired Network Settings
Before you can project from multiple computers on your network, you must select the network settings
for the projector using its menu system.
Note: Make sure you already connected the projector to your wired network using the LAN port.
1. Turn on the projector.
2. Press the Menu button on the remote control.
3. Select the Network menu and press Enter.
4. Select Network Configuration and press Enter.
5. Select the Basic menu and press Enter.
PowerLite 93
43