EasyManuals Logo

Epson PowerLite S11 User Manual

Epson PowerLite S11
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.
If you are using the ECO Power Consumption setting, try selecting Normal in the Settings menu.
If the image has been progressively darkening, you may need to replace the projector lamp soon.
Parent topic: Solving Image or Sound Problems
Related concepts
Projector Lamp Maintenance
Related references
Input Signal Settings - Signal Menu
Image Quality Settings - Image Menu
Projector Feature Settings - Settings Menu
Solutions When There is No Sound or Low Volume
If there is no sound when you expect it or the volume is too low, try the following solutions:
Adjust the projector's volume settings.
Press the A/V Mute button on the remote control to resume video and audio if they were temporarily
stopped.
Press the Source Search button to switch to the correct input source, if necessary.
Check your computer or video source to make sure the volume is turned up and the audio output is set
for the correct source.
Check the audio cable connections between the projector and your video source.
If you do not hear sound from an HDMI source (PowerLite X12/X15), set the connected device to PCM
output.
Make sure any connected audio cables are labeled "No Resistance".
If you are using the USB Display function, turn on the Output audio from the projector setting in the
EPSON USB Display Settings program on your computer.
Parent topic: Solving Image or Sound Problems
Solving Projector or Remote Control Operation Problems
Check the solutions in these sections if you have problems operating the projector or remote control.
Solutions to Projector Power or Shut-Off Problems
119

Table of Contents

Other manuals for Epson PowerLite S11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite S11 and is the answer not in the manual?

Epson PowerLite S11 Specifications

General IconGeneral
Matrix type3-panel (p-Si TFT active)
Projection distance- m
Projection technologyLCD
Contrast ratio (typical)3000:1
Screen size compatibility30 - 350 \
Projector native resolutionSVGA (800x600)
Keystone correction, horizontal30 °
InterfaceUSB
Aspect ratio4:3
RS-232 ports1
Dimensions (WxDxH)295 x 79 x 229 mm
Connectivity technologyWired
FocusManual
Zoom capabilityYes
Focal length range16.7 mm
Lamp typeUHE
Lamp power200 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
HDMI ports quantity0
Serial interface typeRS-232
USB 2.0 ports quantity2
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions1280 x 960, 1024 x 768 (XGA), 1152 x 864 (XGA+), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
RMS rated power2 W
Product colorWhite
Cable lock slot typeKensington
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)2.9 W
Power consumption (typical)283 W
Noise level37 dB
Noise level (economic mode)29 dB
Storage temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Weight2300 g

Related product manuals