EasyManuals Logo

Epson PowerLite S11 User Manual

Epson PowerLite S11
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
1. Connect the HDMI cable to your video source's HDMI output port.
2. Connect the other end to the projector's HDMI port.
PowerLite X12
PowerLite X15
Parent topic: Connecting to Video Sources
Connecting to a Component-to-VGA Video Source
If your video source has component video ports, you can connect it to the projector using a component-
to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along
with a component video cable.
1. Connect the component connectors to your video source's color-coded component video output
ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors
to your component video cable.
2. Connect the VGA connector to the projector's Computer port.
PowerLite S11/X12
34

Table of Contents

Other manuals for Epson PowerLite S11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite S11 and is the answer not in the manual?

Epson PowerLite S11 Specifications

General IconGeneral
Matrix type3-panel (p-Si TFT active)
Projection distance- m
Projection technologyLCD
Contrast ratio (typical)3000:1
Screen size compatibility30 - 350 \
Projector native resolutionSVGA (800x600)
Keystone correction, horizontal30 °
InterfaceUSB
Aspect ratio4:3
RS-232 ports1
Dimensions (WxDxH)295 x 79 x 229 mm
Connectivity technologyWired
FocusManual
Zoom capabilityYes
Focal length range16.7 mm
Lamp typeUHE
Lamp power200 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
HDMI ports quantity0
Serial interface typeRS-232
USB 2.0 ports quantity2
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions1280 x 960, 1024 x 768 (XGA), 1152 x 864 (XGA+), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
RMS rated power2 W
Product colorWhite
Cable lock slot typeKensington
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)2.9 W
Power consumption (typical)283 W
Noise level37 dB
Noise level (economic mode)29 dB
Storage temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Weight2300 g

Related product manuals