Need help?Do you have a question about the Epson PowerLite S11 and is the answer not in the manual?
General| Matrix type | 3-panel (p-Si TFT active) |
|---|---|
| Projection distance | - m |
| Projection technology | LCD |
| Contrast ratio (typical) | 3000:1 |
| Screen size compatibility | 30 - 350 \ |
| Projector native resolution | SVGA (800x600) |
| Keystone correction, horizontal | 30 ° |
| Interface | USB |
| Aspect ratio | 4:3 |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 295 x 79 x 229 mm |
| Connectivity technology | Wired |
| Focus | Manual |
| Zoom capability | Yes |
| Focal length range | 16.7 mm |
| Lamp type | UHE |
| Lamp power | 200 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Service life of light source (economic mode) | 5000 h |
| DVI port | No |
| HDMI ports quantity | 0 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 2 |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 1280 x 960, 1024 x 768 (XGA), 1152 x 864 (XGA+), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 640 x 480 (VGA), 800 x 600 (SVGA) |
| RMS rated power | 2 W |
| Product color | White |
| Cable lock slot type | Kensington |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 2.9 W |
| Power consumption (typical) | 283 W |
| Noise level | 37 dB |
| Noise level (economic mode) | 29 dB |
| Storage temperature (T-T) | 5 - 35 °C |
Weight and Dimensions| Weight | 2300 g |
|---|
To Next Page
