EasyManuals Logo

Epson PowerLite S27 User Manual

Epson PowerLite S27
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #118 background imageLoading...
Page #118 background image
Note: While you use the split screen feature, other projector features may not be available and some
settings may be automatically applied to both images.
1. Press the Split button on the remote control.
The currently selected input source moves to the left side of the screen.
2. Press the Menu button.
You see this screen:
3. To select an input source for the other image, select the Source setting, press Enter, select the
input source, select Execute, and press Enter. (You can also change image sources, if necessary.)
4. To switch the images, select the Swap Screens setting and press Enter.
5. To change the image sizes, select the Screen Size setting, press Enter, select a sizing option,
press Enter, and press Menu to exit.
118

Table of Contents

Other manuals for Epson PowerLite S27

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite S27 and is the answer not in the manual?

Epson PowerLite S27 Specifications

General IconGeneral
Matrix size0.55 \
Matrix type3-panel (p-Si TFT active)
Number of colors1.073 billion colors
Native aspect ratio4:3
Projection distance1.77 - 2.4 m
Projection technology3LCD
Contrast ratio (typical)10000:1
Screen size compatibility30 - 350 \
Projection distance (tele)0 - 2.4 m
Projection distance (wide)0 - 1.77 m
Projector native resolutionSVGA (800x600)
Keystone correction, horizontal-30 - 30 °
Projector brightness (economic mode)1890 ANSI lumens
FocusManual
Throw ratio1.45 - 1.96:1
Focal length range16.9 - 20.28 mm
Aperture range (F-F)1.44 - 1.44
Lamp typeUHE
Lamp power200 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source5000 h
Service life of light source (economic mode)10000 h
Full HDNo
Video processing10 bit
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions1280 x 800, 1366 x 768, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 640 x 480 (VGA)
DC-in jackYes
USB connector typeUSB Type-A, USB Type-B
Serial interface typeRS-232
USB 2.0 ports quantity2
Ethernet LAN (RJ-45) ports-
Noise level37 dB
2D/3D frequency image50 - 85 Hz
Noise level (economic mode)29 dB
RMS rated power5 W
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Power sourceAC
AC input voltage100 - 240 V
Voltage tolerance10 %
AC input frequency50 - 60 Hz
Power consumption (standby)0.21 W
Power consumption (typical)284 W
Power consumption (economy mode)208 W
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Depth244 mm
Width297 mm
Height87 mm
Weight2500 g

Related product manuals