Setting Options Description
Standby Mode Communication On Enable this setting to allow the
following operations to occur
Communication Off
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to Always On)
• Output audio from a
microphone (A/V Output must
be set to Always On)
ECO Display On Displays a leaf icon in the bottom
left corner of the projected screen
Off
to indicate the power-saving
status when the lamp brightness
changes
Parent topic: Adjusting the Menu Settings
143
To Next Page
Loading...
