Name: Epson PowerLite S7
Brand: Epson
Rating: 4 (1 reviews)

To Next Page

To Previous Page

26 Setting Up the Projector

Connecting to the USB Port

You can connect a Windows Vista, XP, or Windows 2000 (SP4)

computer to the projector’s

TypeB (square) USB port and

project your computer’s display. A USB 2.0 connection

(recommended) provides better picture quality and response than

USB 1.1.

The first time you connect a computer to the projector’s USB port,

software from the projector is installed on your computer.

1. Follow the instructions beginning on page 36 to turn on the

projector.

2. Make sure the

USB Type B setting on the Extended menu is set

USB Display (see page 60).

3. Turn on your computer.

4. Connect the square end of a USB cable to the projector’s

TypeB

(square) USB port.

5. Connect the flat end of the cable to any available USB port on

your notebook or desktop computer.

Messages appear on your computer screen as the projector is

recognized and the software is installed automatically.

6. Follow the instructions on the screen to install the Epson USB

Display software. If you see a “Digital Signature Warning,” select

Continue or Continue Anyway. (You see these instructions only

the first time you connect.)

note

The USB Display feature

does not support Mac OS.

USB TypeB port

note

If the software does not

install automatically, you

can install it manually.

Other manuals for Epson PowerLite S7

Questions and Answers:

Need help?

Do you have a question about the Epson PowerLite S7 and is the answer not in the manual?

General

projection system	Epson 3LCD, 3-chip optical engine
pixel number	480, 000 dots (800 x 600) x 3
native resolution	800 x 600 (SVGA)
resize	640 x 480 (VGA), 1024 x 768 (XGA), 1152 x 864 (SXGA1), 1280 x 800 (WXGA), 1440 x 900 (WSXGA), 1280 x 960 (SXGA2), 1280 x 1024 (SXGA3), 1280 x 768 (WXGA60-1), 1360 x 768 (WXGA60-2), 1400 x 1050 (SXGA+)
throw ratio range	1.45 – 1.96 (4:3)
size (projected distance)	30" – 350" (2.9' – 34.4')
keystone correction manual vertical	± 30 degrees
white light output	2300 lumens (ISO 21118 Standard)
color light output	2300 lumens
lamp type	175 W UHE (E-TORL)
lamp life (ECO mode)	up to 5000 hours
lamp life (normal mode)	up to 4000 hours
power supply voltage	100 – 240 V ±10%, 50/60 Hz
power consumption	244 W (Normal Mode), 2.6 W Standby (Communication On), 0.3 W Standby (Communication Off)
operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
speaker	1 W (Mono)
fan noise (normal mode)	34 dB
fan noise (ECO mode)	29 dB