3. Click the Details tab, and then click the Add Port button. Select the Other radio button, and
then select EpsonNet Print Port. Click OK.
4. Select the target printer, and then click Next.
Note:
❏ If the target printer is not in the list, click the Search Again button to search the printers using
new parameters.
❏ If you want to search printers in other segments, click the N/W Settings button. Select the
Specific Network Segments check box, and then enter the network address and subnet mask
of the network segment for the search. Then click the Add button. You can also specify the time
before declaring communication error.
EPSON Network Guide
Network Software 113
To Next Page
Loading...
