Epson Printer

5. Confirm the information about the printer’s port you want to configure, and then click Finish.
Items Explanations
Port Type The following items are listed in the pull-down menu, and you can select the port
type you need.
IP Address(Auto): Configure the port automatically. If the IP address of the
printer is acquired automatically and the computer and the printer are in the
same segment, you can select this port type.
IP Address(Manual): Use the printer’s IP Address for the port name.
HostName (DNS): Use the printer’s host name registered in the DNS server for
the port name.
MS Network: Use the NetBIOS name registered in the printer for the port name.
The port Information The following items are displayed:
- Port Name (If the port type is changed, the port name and the host name or IP
address are also changed.)
- Printer Model
- Host Name or IP Address
- Protocol
Finish button Register the port information to the system and close the Add EpsonNet Print
Port Wizard.
Back button Go back to the printer list window.
Cancel button Close the Add EpsonNet Print Port Wizard.
The printer is now ready for peer-to-peer printing. To configure the printer port, see “Configuring
the Printer Port” on page 117.
EPSON Network Guide
Network Software 114