3. Configure the network interface using EpsonNet Config. See the EpsonNet Config User’s Guide
for details.
If NetWare objects are already created, you can also use EpsonNet Config with Web Browser.
See the EpsonNet Config with Web Browser help for details.
Using NDS Print Server (NetWare 4.x/5.x/6.0)
This section contains instructions for using the network interface in the Print Server mode on
NetWare 4.x, IntranetWare, NetWare 5.x, or NetWare 6.0 with NDS mode.
1. Turn on your printer.
2. From any NetWare client, log in to the target context of the NDS tree as an ADMIN.
3. Configure the network interface using EpsonNet Config. See the EpsonNet Config User’s Guide
for details.
If NetWare objects are already created, you can also use EpsonNet Config with Web Browser.
See the EpsonNet Config with Web Browser help for details.
Using Remote Printer Mode (NetWare 3.x)
For NetWare 3.x users, follow the steps below to make the printer environment with PCONSOLE.
Creating print queues in a file server
1. From any NetWare client, log in to the network with supervisor privileges.
2. Run PCONSOLE. From the Available Options screen, select Print Queue Information and press
Enter.
3. Press the Insert key on your keyboard and enter the print queue name. Press Enter.
Note:
Since your clients need the print queue name you set here when they use the printer, announce the
print queue name to your clients.
EPSON Network Guide
How To 79
To Next Page
Loading...
Need help?
General