Epson PRO L1490U - Connecting to a Video Source for Sound

38
2. Connect the other end to the projector's SDI port.
Parent topic: Connecting to Video Sources
Connecting to a Video Source for Sound
If you connected external speakers to the projector, you can connect your video source to the projector
with an audio cable to play sound.
Note: If you connected your video source to the projector's SDI port
(Pro
L1490U/L1490UNL/L1495U/L1495UNL/L1500UH/L1500UHNL/L1505UH/L1505UHNL/L1750UNL/L175
5UNL), audio output is not supported.
Note: If you connected your video source to the projector using an HDMI cable, the audio signal is
transferred with the video signal; you do not need an additional cable for sound. If you have problems
hearing audio through the HDMI connection, you can play sound through an audio cable instead by
following the steps described here.
1. Connect one end of a 3.5 mm stereo mini-jack audio cable to your video source's audio-out port.